YASKAWA DX100 - Connection Methods; Connecting the Primary Power Supply

4 Connection
DX100 4.3 Connection Methods
4-6
4.3 Connection Methods
A connection diagram for the manipulator, manipulator cable, primary
power cable and programming pendant is shown below.
Fig. 4-6: Cable Connection
4.3.1 Connecting the Primary Power Supply
1. Open the front door of the DX100.
(1) Using a flathead screwdriver, rotate the door locks on the front of
the DX100 (two places) 90 degrees clockwise.
Fig. 4-7: Rotating the Door Lock Clockwise
DX100DX100
Programming
Pendant Cable
Manipulator
Cable
Manipulator
Primary Power Supply Cable
clockwise
90
door lock
flathead screw dri
v
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167