YASKAWA DX100 - Page 43

4 Connection
DX100 4.3 Connection Methods
4-7
(2) Rotate the main power supply switch to the "OFF" position and
open the door gently.
Fig. 4-8: Rotating the Main Power Supply Switch to the OFF Position
2. Confirm that the primary power supply is OFF.
3. Connect the primary power supply cable.
– Draw the primary power supply cable in from the cable entrance on
top side of DX100 and fix it firmly with the cable clamp so that it
won’t shift or slip out of place.
Fig. 4-9: Cable Clamp
CAUTION
Cable clamp must be used when connnecting primary power supply.
Make sure that the cable clamp is fastened tightly to prevent dust or
water from entering.
Failure to observe this caution may result in electric shock or
breakdown of DX100.
Main power supply switch
DX100
Primary Power Supply Cable
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167