YASKAWA DX100 - Initial Diagnosis; When Initial Diagnosis Are Complete

5 Turning ON and OFF the Power Supply
DX100 5.1 Turning ON the Main Power Supply
5-2
5.1.1 Initial Diagnosis
The initial diagnosis are performed in the DX100 when main power is
turned ON, and the startup window is shown on the programming pendant
screen.
Fig. 5-2: Startup Window
5.1.2 When Initial Diagnosis are Complete
When the power supply is turned OFF, the DX100 saves all condition
data, including:
• Mode of operation
• Called job (active job if the DX100 is in the play mode; edit job if the
DX100 is in the teach mode) and the cursor position in the job.
Fig. 5-3: Initial Window
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167