YASKAWA DX100 - Turning on the Servo Power; During Play Mode; During Teach Mode

5 Turning ON and OFF the Power Supply
DX100 5.2 Turning ON the Servo Power
5-3
5.2 Turning ON the Servo Power
5.2.1 During Play Mode
The worker’s safety is secure if the safety plug is turned ON.
• When the safeguarding is closed, press [SERVO ON READY] on
the programming pendant to turn ON the servo power supply.
[SERVO ON] lamp will light, when the servo power is turned ON.
5.2.2 During Teach Mode
1. Press [SERVO ON READY] on the programming pendant to turn ON
the servo power supply. [SERVO ON] lamp will flicker when the servo
power is turned ON.
2. The servo power is turned ON and [SERVO ON] lamp on the
programming pendant lights when the operator grips the Enable
switch.
NOTE
When the safeguarding is open, the servo power supply
cannot be turned ON.
SERVO ON
READY
SERVO ON
Light
SERVO ON
READY
SERVO ON
Flicker
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167