YASKAWA DX100 - Page 95

8 System Setup
DX100 8.3 Tool Data Setting
8-30
– The confirmation dialog box is shown.
3. Select {YES}.
– All data is cleared.
SUPPLE
-MENT
If tool angle data is required, input the data number in the
tool coordinate window.
Refer to chapter 8.3.1.3 “Registering Tool Angle” at
page 8-21 for the operating instructions.
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167