viii
• Provide appropriate braking devices on the machine side to ensure safety.
The holding brake on a servomotor with a brake is not a braking device for
ensuring safety.
Failure to observe this warning may result in injury.
• Do not come close to the machine immediately after resetting an instanta-
neous power interruption to avoid an unexpected restart. Take appropriate
measures to ensure safety against an unexpected restart.
Failure to observe this warning may result in injury.
• Connect the ground terminal according to local electrical codes (100
Ω
or
less for a SERVOPACK with a 100 V, 200 V power supply, 10
Ω
or less for a
SERVOPACK with a 400 V power supply).
Improper grounding may result in electric shock or fire.
• Installation, disassembly, or repair must be performed only by authorized
personnel.
Failure to observe this warning may result in electric shock or injury.
• The person who designs a system using the safety function (Hard Wire
Baseblock function) must have full knowledge of the related safety stan-
dards and full understanding of the instructions in this manual.
Failure to observe this warning may result in injury or damage to the equipment.
WARNING
To Next Page
Loading...
Need help?
General
