YASKAWA FS100 - 7.3 Checking of the Check Program

2 INFORM Explanation
FS100 2.2 Control Instruction : JUMP
2-28
(1) JUMP *1
Jumps to *1.
(2) JUMP JOB:TEST1 UF#(2)
Jumps to the job named TEST1. TEST1 works in user coordinate
system No.2.
(3) SET B000 1
JUMP B000 IF IN#(14)=ON
If input signal no.14 is on, it jumps to job “1”.
Example