YASKAWA FSDrive-MV1000 Series - Page 61

2.2 Mechanical Installation
YASKAWA ELECTRIC EZZ010926 FSDrive-MV1000 Instructions 61
Mechanical Installation
2
■ Example Drive Installation
Use a taper washer for the channel contact surface.
Figure 2.26
Figure 2.26 Channel Contact Face
Figure 2.27
Figure 2.27 Dimension Drawing 1 for Bottom (Class: 2 kV)
Figure 2.28
Figure 2.28 Dimension Drawing 2 for Bottom (Class: 2 kV)
Taper washer for M12 bolt
<1>
FL
φ17
M12 bolt, nut, washer, and S-washer
<1>
<1>
To be prepared by the customer.
20
20
d
120120
W1 W1
Front: with the door removed
Cable inlet
6- φ 17
2.4kV
20
20
d
120
W2W1 240
Front: with the door removed
Cable inlet
8-φ17
120120120
2.4kV