11.11 o: Keypad-Related Settings
1016 YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
■ o1-44: 2nd Monitor Area Setting
No.
(Hex.)
Name Description
Default
(Range)
o1-44
(11C4)
RUN
2nd Monitor Area
Setting
Sets the horizontal axis value used to display the monitor that was set in o1-
25 [Custom Monitor 2] as a bar graph. This parameter is only available with
an LCD keypad.
100.0%
(0.0 - 100.0%)
■ o1-45: 3rd Monitor Area Selection
No.
(Hex.)
Name Description
Default
(Range)
o1-45
(11C5)
RUN
3rd Monitor Area
Selection
Sets the horizontal axis used to show the monitor that was set in o1-26 as a
bar graph. This parameter is only available with an LCD keypad.
0
(0 - 2)
0 : +/- Area ( - o1-46 ～ o1-46 )
1 : + Area ( 0 ～ o1-46 )
2 : - Area ( - o1-46 ～ 0 )
■ o1-46: 3rd Monitor Area Setting
No.
(Hex.)
Name Description
Default
(Range)
o1-46
(11C6)
RUN
3rd Monitor Area
Setting
Sets the horizontal axis value used to display the monitor that was set in o1-
26 [Custom Monitor 3] as a bar graph. This parameter is only available with
an LCD keypad.
100.0%
(0.0 - 100.0%)
■ o1-47: Trend Plot 1 Scale Minimum Value
No.
(Hex.)
Name Description
Default
(Range)
o1-47
(11C7)
RUN
Trend Plot 1 Scale
Minimum Value
Sets the minimum value for the vertical axis used to display the monitor that
was set in o1-24[Custom Monitor 1] as a trend plot. This parameter is only
available with an LCD keypad.
100%
(-300 - +300%)
■ o1-48: Trend Plot 1 Scale Maximum Value
No.
(Hex.)
Name Description
Default
(Range)
o1-48
(11C8)
RUN
Trend Plot 1 Scale
Maximum Value
Sets the maximum value for the vertical axis used to display the monitor
that was set in o1-24 o1-24 [Custom Monitor 1] as a trend plot. This
parameter is only available with an LCD keypad.
100.0%
(-99.9 - +300.0%)
■ o1-49: Trend Plot 2 Scale Minimum Value
No.
(Hex.)
Name Description
Default
(Range)
o1-49
(11C9)
RUN
Trend Plot 2 Scale
Minimum Value
Sets the minimum value for the vertical axis used to display the monitor that
was set in o1-25[Custom Monitor 2] as a trend plot. This parameter is only
available with an LCD keypad.
100%
(-300 - +300%)
To Next Page
Loading...
