7.4 Replace a Cooling Fan and Circulation Fan
422 YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
A - Cooling Fan
B - Fan unit base
C - Alignment pin on fan unit base
Figure 7.46 Install the Cooling Fan
Note:
When you install the cooling fan, make sure that you do not pinch cables between the cooling fan and the fan unit base.
3. Put the fan unit into the specified location and use screws to safety it to the drive.
Tighten the screws to a tightening torque of 0.98 N∙m to 1.33 N∙m (8.67 lb.∙in. to 11.77 lb.∙in.).
Figure 7.47 Install the Fan Unit
To Next Page
Loading...
