Parameter List
10
10.7 d: Reference Settings
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual 519
10.7 d: Reference Settings
◆ d1: Frequency Reference
No.
(Hex.)
Name Description
Default
(Range)
Ref.
d1-01
(0280)
RUN
Reference 1
Sets the frequency reference in the units from o1-03 [Frequency
Display Unit Selection.
Note:
o1-03 = 1 [0.01% (100% = E1-04)] when A1-02 = 6, 7 [Control
Method Selection = PM Advanced Open Loop Vector, PM Closed
Loop Vector].
0.00 Hz
(0.00 - 590.00 Hz)
777
d1-02
(0281)
RUN
Reference 2
Sets the frequency reference in the units from o1-03 [Frequency
Display Unit Selection].
Note:
o1-03 = 1 [0.01% (100% = E1-04)] when A1-02 = 6, 7 [Control
Method Selection = PM Advanced Open Loop Vector, PM Closed
Loop Vector].
0.00 Hz
(0.00 - 590.00 Hz)
778
d1-03
(0282)
RUN
Reference 3
Sets the frequency reference in the units from o1-03 [Keypad
Display Selection].
Note:
The default setting is o1-03 = 1 [0.01% (100% = E1-04)] when
A1-02 = 6, 7 [Control Method Selection = PM Advanced Open
Loop Vector, PM Closed Loop Vector].
0.00 Hz
(0.00 - 590.00 Hz)
778
d1-04
(0283)
RUN
Reference 4
Sets the frequency reference in the units from o1-03 [Frequency
Display Unit Selection].
Note:
o1-03 = 1 [0.01% (100% = E1-04)] when A1-02 = 6, 7 [Control
Method Selection = PM Advanced Open Loop Vector, PM Closed
Loop Vector].
0.00 Hz
(0.00 - 590.00 Hz)
778
d1-05
(0284)
RUN
Reference 5
Sets the frequency reference in the units from o1-03 [Frequency
Display Unit Selection].
Note:
o1-03 = 1 [0.01% (100% = E1-04)] when A1-02 = 6, 7 [Control
Method Selection = PM Advanced Open Loop Vector, PM Closed
Loop Vector].
0.00 Hz
(0.00 - 590.00 Hz)
778
d1-06
(0285)
RUN
Reference 6
Sets the frequency reference in the units from o1-03 [Frequency
Display Unit Selection].
Note:
o1-03 = 1 [0.01% (100% = E1-04)] when A1-02 = 6, 7 [Control
Method Selection = PM Advanced Open Loop Vector, PM Closed
Loop Vector].
0.00 Hz
(0.00 - 590.00 Hz)
779
d1-07
(0286)
RUN
Reference 7
Sets the frequency reference in the units from o1-03 [Frequency
Display Unit Selection].
Note:
o1-03 = 1 [0.01% (100% = E1-04)] when A1-02 = 6, 7 [Control
Method Selection = PM Advanced Open Loop Vector, PM Closed
Loop Vector].
0.00 Hz
(0.00 - 590.00 Hz)
779
d1-08
(0287)
RUN
Reference 8
Sets the frequency reference in the units from o1-03 [Frequency
Display Unit Selection].
Note:
o1-03 = 1 [0.01% (100% = E1-04)] when A1-02 = 6, 7 [Control
Method Selection = PM Advanced Open Loop Vector, PM Closed
Loop Vector].
0.00 Hz
(0.00 - 590.00 Hz)
779
To Next Page
Loading...
