Parameter List
10
10.10 H: Terminal Functions
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual 555
No.
(Hex.)
Name Description
Default
(Range)
Ref.
H2-65
(1B4B)
Expert
Terminal M3-M4
Delay Time
Sets the minimum on time used to output the logical calculation
results from terminal M3-M4.
0.1 s
(0.0 - 25.0 s)
895
H2-66
(1B4C)
Expert
Term M5-M6
Secondary
Function
Selects the second function for terminal M5-M6. The logical
calculation results of the terminals assigned to functions by H2-03
[Term M5-M6 Function Selection] is output.
F
(0 - A7)
896
H2-67
(1B4D)
Expert
Terminal M5-M6
Logical Operation
Sets the logical operation for the functions set in H2-03 [Term M5-
M6 Function Selection] and H2-66 [Term M5-M6 Secondary
Function].
0
(0 - 8)
896
H2-68
(1B4E)
Expert
Terminal M5-M6
Delay Time
Sets the minimum on time used to output the logical calculation
results from terminal M5-M6.
0.1 s
(0.0 - 25.0 s)
896
■ H2-xx: MFDO Function Selections
Setting Function Description Ref.
0 During Run
The terminal activates when the Run command is input and when the drive is making
voltage.
ON : Drive is running
OFF : Drive is stopping
896
1 Zero Speed
The terminal activates when the output frequency is less than the value of E1-09
[Minimum Output Frequency] or b2-01 [DC Injection/Zero SpeedThreshold].
Note:
A1-02 [Control Method Selection] selects which parameter is the reference.
A1-02 Setting Control Method
Parameter Used as the
Reference
0 V/f E1-09
1 CL-V/f E1-09
2 OLV b2-01
3 CLV E1-09
4 AOLV E1-09
5 OLV/PM E1-09
6 AOLV/PM E1-09
7 CLV/PM b2-01
8 EZOLV E1-09
ON : Output frequency < value of E1-09 or b2-01.
OFF : Output frequency ≥ value of E1-09 or b2-01.
896
2 Speed Agree 1
The terminal turns on when the output frequency is in the range of the frequency
reference ± L4-02 [Speed Agree Detection Width].
Note:
The drive uses the motor speed as the reference in CLV.
ON : The output frequency is in the range of “frequency reference ± L4-02.”
OFF : The output frequency does not align with the frequency reference although the
drive is running.
897
To Next Page
Loading...
