YASKAWA iQpump1000 - Menu Structure for HOA Keypad

u
Menu Structure for HOA Keypad
- MODE -
U5-99= 0.0PSI
U1-02= 0.00Hz
U1-91= 0.0PSI
DRV
Auto Setpoint
Rdy
<4>
<5>
- MODE -
U1-01= 0.00Hz
U1-02= 0.00Hz
U1-91= 0.0PSI
DRV
Monitor Menu
Rdy
- MODE - PRG
Modified Consts
Home
Home
- MODE - PRG
Pump Quick Setup
Home
- MODE - PRG
Auto-Tuning
Home
- MODE - PRG
Programming
AUTO
-MONITR-
U1-01=0.00Hz
U1-02= 0.00Hz
U1-91= 0.0PSI
DRV
Frequency Ref
Rdy
-MONITR-
U2 -01= -----
U2-02= oPr
U2-03= 0.00Hz
DRV
Fault Trace
Rdy
<-MONITOR->
JOG
FWD
FWD
FWD
FWD
Modified
X Parameters
LSEQ
LREF
LSEQ
LREF
LSEQ
LREF
LSEQ
LREF
YASKAWA
iQPump
XXXV, XXXHP
XXXA
<XXXXXXXXX>
CIMR-PWXXXXXXXX
Initial Display <6>
<7>
Programming Mode <3> Drive Mode <2>
Home FWD
Home
FWD
FWD
QMONI: Use F1/F2
MENU: Use UP/DWN
<1>
-MONITR-
U1 -01= 0.00Hz
U1-02= 0.00Hz
U1-91= 0.0PSI
DRV
Monitor
JOG
Rdy
LSEQ
LREF
Home FWD
-MONITR-
U1-02= 0.00Hz
U1-02= 0.00Hz
U1-91= 0.0PSI
DRV
Output Freq
Rdy
LSEQ
LREF
Home
FWD
JOG
Home
F1
- MODE -
U1-99= 0.0sec
U1-02= 0.00Hz
U1-91= 0.0PSI
DRV
ANF Timer
Rdy
<-MONITOR->
LSEQ
LREF
QMONI: Use F1/F2
MENU: Use UP/DWN
Figure 4.7 HOA Keypad Menu and Screen Structure
<1> The display cycles between these three displays on the initial startup screen and the Quick Monitor screens.
<2>
Pressing
AUTO
or
HAND
will start the motor.
<3> Drive cannot operate motor.
<4> Flashing characters are shown with white letters on gray background. (Example:
0
)
<5> “X” characters are used as examples in this manual. The HOA keypad will display the actual setting values.
<6> The Frequency Reference appears after the initial display that shows the product name.
<7> The information that appears on the display will vary depending on the drive model.
4.3 Using the HOA Keypad
YASKAWA TOEP YAIP1W 01A YASKAWA AC Drive - iQpump1000 Quick Start Guide
115
4
Start-Up Programming & Operation