Specifications
10
10.6 Peripheral Devices and Options
YASKAWA SIEPYEULA5001C LA500 Technical Manual 233
10.6 Peripheral Devices and Options
These tables show the available peripheral devices and options for the drive. Contact Yaskawa or your nearest
sales representative to make an order.
• Selection: Refer to the drive catalog for information about available products.
• Installation and wiring: Refer to the instruction manual for each option.
Table 10.15 Main Circuit Options
Name Model Intended Use
AC reactor LR3 series and B series
To improve the drive input power factor.
• To prevent damage to the drive when the power supply capacity is large. You must only use this option
when the power supply capacity is more than 600 kVA.
• To decrease harmonic current.
• To improve the power supply total power factor.
Braking Resistor RH Series
To decrease the regenerative energy of the motor and decrease the deceleration time (duty cycle of 3%
ED). You must also use the installation attachment.
Table 10.16 Engineering Tools
Name Model Intended Use
DriveWizard -
To use a PC to program drives and manage parameters.
To Next Page
Loading...
