YASKAWA LA500 - How to Read the Parameter List

11.1 How to Read the Parameter List
236 YASKAWA SIEPYEULA5001C LA500 Technical Manual
11.1 How to Read the Parameter List
◆ Icons and Terms that Identify Parameters and Control Modes
Icon Description
The parameter is available when operating the drive with V/f Control.
The parameter is available when operating the drive with Open Loop Vector Control.
RUN The parameter can be changed settings during run.
Expert The parameter that is available in Expert Mode only.
*1
*1 Set A1-01 = 3 [Access Level Selection = Expert Level] to display and set Expert Mode parameters on the keypad.
Note:
An icon like identifies parameters that are available in the specified control method.
An icon like identifies parameters that are not available in the specified control method.
V/f
OLV
V/f
V/f