YASKAWA LA500 - O: Keypad-Related Settings; O1: Keypad Display Selection

Parameter Details
12
12.9 o: Keypad-Related Settings
YASKAWA SIEPYEULA5001C LA500 Technical Manual 347
12.9 o: Keypad-Related Settings
o parameters set keypad functions.
Note:
You cannot use the optional LED keypad to set these parameters.
Table 12.11 Parameters You Cannot Set with the LED Keypad
No. Name
o1-24 to o1-29
Custom Monitor 1 to 12
o1-39
Show Initial Setup Screen
o2-27
bCE Detection Selection
o3-04
Select Backup/Restore Location
o3-05
Select Items to Backup/Restore
o3-06
Auto Parameter Backup Selection
o3-07
Auto Parameter Backup Interval
No. Name
o4-22
Time Format
o4-23
Date Format
o4-24
bAT Detection Selection
o5-01
Log Start/Stop Selection
o5-02
Log Sampling Interval
o5-03 to o5-12
Log Monitor Data 1 to 10
◆ o1: Keypad Display Selection
o1 parameters select the parameters shown on the initial keypad screen and to configure the parameter setting
units and display units. These parameters also adjust the backlight and contrast of the LCD display.
■ Home Screen Display Format
o1-40 [Home Screen Display Selection] changes the display of the monitor shown on the Home screen. You can
show numerical values or one of these three displays on the Home screen monitor:
A - Set Ux-xx [Monitors] to o1-24, o1-25, and o1-26. B - Set display ranges to o1-42, o1-44, and o1-46.
Figure 12.35 Bar Graph Display
A - Set Ux-xx [Monitors] to o1-24. B - Set display ranges to o1-55.
Figure 12.36 Analog Gauge Display
A - Set Ux-xx [Monitors] (Monitor 1) to o1-24. B - Set Ux-xx [Monitors] (Monitor 2) to o1-25.
Figure 12.37 Trend Plot Display