4 Transport and Installation
4.3 Transport
4-3
154771-1CD
HW1480052
4.3 Transport
4.3.1 Transporting Method
• Sling and crane or forklift operations must be performed by authorized personnel only.
Failure to observe this caution may result in injury or damage.
• Avoid excessive vibration or shock during transport.
The system consists of precision components. Failure to observe this caution may
adversely affect performance.
• The mass of the manipulator is approximately 900 kg including the shipping bolts
and brackets. Use a wire rope strong enough to withstand the mass.
• The attached eyebolts are designed to support the manipulator mass. Never
use them for anything other than transporting the manipulator.
• Mount the shipping bolts and brackets before transporting the manipulator.
• With any transportation equipment, make sure to avoid external force on the arm
or motor unit when transporting the manipulator.
To Next Page
Loading...
