4 Transport and Installation
4.3 Transport
4-4
154771-1CD
HW1480052
Using a Crane
As a rule, when uncrating the manipulator and moving it, a crane should be used. Lift the
manipulator with a wire rope using the attached eyebolts. Make sure to fix the manipulator
with shipping bolts and brackets before transport, and lift it in the posture as shown in
Fig. 4-2 "Transport Using a Crane".
Fig. 4-2 Transport Using a Crane
before shipment)
(Fixed to the manipulater
Shipping bolt and bracket
before shipment)
(Fixed to the manipulater
Eyebolt M20
To Next Page
Loading...
