2 Transport
2.2 Shipping Bolts and Brackets
2-3
155976-1CD
HW0485249
ES165D
2.2 Shipping Bolts and Brackets
The manipulator is provided with shipping bolts and brackets at position A
and with the hexagon socket head cap screws at point B. (Fig. 2-1
“Transporting Position”).
Fig. 2-2: Shipping Bolts and Brackets
• The A-shipping brackets are painted in yellow.
• The B-shipping bolt: hexagon socket head cap screw is taped in
yellow.
Position Bolt Type Pcs
A Hexagon socket head cap screw M20 X 70 mm 12
B Hexagon socket head cap screw M16 X 20 mm 1
Before turning ON the power, check to be sure that the
shipping bolts and brackets are removed. The shipping
bolts and brackets then must be stored for future use, in the
event that the manipulator must be moved again.
Hook
Electrical tape painted
in yellow
Rubber plate
B
A
Shipping bracket
Shipping bolt
To Next Page
Loading...
