5 Basic Specifications
5.6 Alterable Operating Range
5-9
170625-1CD
HW1482737
ES200RD II
5.6.1 Components for Altering Operating Range
Arrange the components listed in
Fig. 5-8 “Components of S-axis Stopper”
,
when modifying the angle of S-axis.
(1) Pin (drawing No. HW0402104-1, 1 pin)
(2) Stopper (drawing No. HW0302424-2, 1 stopper)
(3) Hexagon head screw M20
(length: 45 mm, tensile strength: 1200 N/mm
2
or more, 3 screws)
(4) Flat washer M20 (3 flat washers)
Fig. 5-8: Components of S-axis Stopper
Stopper
(HW0302424-2)
Pin
(HW0402104-1)
Section A-A’
Hexagon head screw M20 (length: 45 mm)
(tensile strength: 1200 N/mm
2
or more, 3 screws)
Washer M20 (3 washers)
A
A
To Next Page
Loading...
