9 Maintenance and Inspection
9.2 Notes on Maintenance Procedures
9-5
170625-1CD
HW1482737
ES200RD II
9.2 Notes on Maintenance Procedures
9.2.1 Battery Pack Replacement
The battery packs are installed in the position shown in Fig. 9-2(a) “Battery
Location (Back View)”, and Fig. 9-2(b) "Battery Location (Top View)" on
page 9-5. If the battery alarm occurs in the DX200, replace the battery in
accordance with the following procedure:
Fig. 9-2(a): Battery Location (Back View)
Fig. 9-2(b): Battery Location (Top View)
Plate
Connector base
Base
Plate mounting screw M4
S1
AIR
2BC
1BC
To Next Page
Loading...
