9-6
170625-1CD
HW1482737
ES200RD II
9 Maintenance and Inspection
9.2 Notes on Maintenance Procedures
Fig. 9-3: Battery Connection
1. Turn OFF the DX200 main power supply.
2. Remove the plate fixing screws and the plate on the connector base,
then pull the battery pack out to replace it with the new one.
3. Remove the battery pack from the battery holder.
4. Connect the new battery pack to the unoccupied connector on the
bo
ard.
5. Remove the old battery pack from the board.
6. Mount the new battery pack to the holder.
7. Reinstall the plate.
New battery pack
(HW0470360-A)
Battery pack before replacement
See the step 5.
See the step 4.
Connector
Board
(Type: SGDR-EFBA02A)
Remove the old battery pack after connecting the new one
so that the encoder absolute data does not disappear.
Do not allow the plate to pinch the cables when reinstalling
the plate.
To Next Page
Loading...
