9.2 Notes on Maintenance Procedures
9-6
HW0482143
9.2 Notes on Maintenance Procedures
9.2.1 Battery Pack Replacement
The battery packs are attached in the two positions as shown in " Fig. 22 (a) Battery Location
(Back View) " and “ Fig.22 (b) Battery Location (Top View) “.
If a battery alarm occurs in the NX100, replace the battery in accordance with the following
procedure:
Fig. 22 (a) Battery Location (Back View)
Fig. 22 (b) Battery Location (Top View)
Base
S1
3BC
AIR
2BC
1BC
Plate
Plate screw M4
Connector base
Board
Battery pack
To Next Page
Loading...
