1 Introduction
1-7
HW1484673
HW1484673
Fall down hazard label
Description
Make sure to secure the manipulator base by using the bolts of the
specified sizes and by tightening the bolts with the specified tightening
torques. If the power is turned ON and the manipulator is operated
without securing the manipulator properly, the manipulator may fall down,
which may result in personal injury and/or equipment damage.
Collision hazard label
Description
Personal injury may result if a person enters the manipulator's operating
range during operation. Immediately press an emergency stop button
whenever there is a problem. Confirm that no person is present in the
manipulator's operating range and that the operator is in a safe location
before:
• Turning ON the YRC1000 power
• Moving the manipulator by using the programming pendant
• Running the system in the check mode
• Performing automatic operations
To Next Page
Loading...
