YASKAWA Motoman GP50 - Page 66

6 Disassembly and Reassembly of the Speed Reducer
6.3 Disassembly and Reassembly of the U-Axis Speed Reducer
6-11
HW1484673
HW1484673
Fig. 6-3(c): Surface to Apply Sealing Bond on the L-Arm on the Other Side
of the U-Axis Speed Reducer
Bead Cross-section
(Indicated in the figure,
the bead height should
be 3 mm, and the width
1 mm.)
3
1
Apply sealing bond
in the bead shape.
66/109