x
186638-1CD
186638-1CD
Safety
Installation and Wiring Safety
GP8 EduCart
.
CAUTION
• Make sure all covers and shields are installed correctly before
operating.
– Some drawings in this manual may have protective covers or
shields removed to show details.
Not having all covers and shields installed correctly can result in injury.
• When installing the Robot system, avoid interference with buildings,
structures, utilities, other machines.
Not avoiding these items may create trapping or pinch points.
• Do not make unauthorized modifications.
Unauthorized modifications can result in injury or equipment damage
and will void the warranty.
• Inspect:
– For problems with movement
– Damages to external wires
Repair any problems immediately and perform all necessary
procedures. If problems are not repaired or procedures are not fixed
unexpected results can occur causing injury.
NOTICE
• If supplying a supplementary audible means for Robot operation, it
shall exceed the ambient noise at the end-use of the application.
• Any changes or additions to the applicable information as provided
by the manufacturer is to be provided by the party that makes the
change or addition to the Robot system
To Next Page
Loading...
