4-2
186638-1CD
186638-1CD
4 Moving Robot to Second Home Position
GP8 EduCart
1. Using the Programming Pendant, place the Robot in a safe position by
pressing the on the {Main Menu}.
CAUTION
• Always return the Programming Pendant to the hook after use.
If the Programming Pendant is left on a fixture, on the floor, or on the
Robot may result in damage to the Programming Pendant or damage
to the Robot.
• Store the Programming Pendant key mode select switch in a safe
place.
After operation, remove and store the Programming Pendant key in a
safe place. Improper or unintended Robot operation may result in
equipment damage.
• Do not drop or mishandle the Programming Pendant.
Dropping or mishandling the Programming Pendant can damage the
keys, the Mode Select Switch, or Emergency Stop button.
NOTICE
If the is not seen on the {Main Menu} press .
ROBOT Button
Scroll Buttons
To Next Page
Loading...
