6-2
186638-1CD
186638-1CD
6 Configuration Of The Programming Pendant
6.1 Programming Pendant
GP8 EduCart
4. Confirm only the selected “INPUT *** CONTROL” switch is set on the
“GENERAL PURPOSE INPUT” screen by pressing the {DISPLAY}.
5. Set the output either from the INFORM job or by manually setting on
the “GENERAL PURPOSE OUTPUT” screen, make sure the I/F Panel
is updated correctly.
NOTICE
In this example, “INPUT 402 CONTROL” switch is used.
NOTICE
On this example, the General Purpose Output screen Output #403 and
#404 are set.
To Next Page
Loading...
