1-1
179394-1CD
HW1483905
1 Receiving
1.1 Checking Package Contents
MFL15D-875/-1600
1 Receiving
1.1 Checking Package Contents
When the package arrives, check the contents for the following standard
items (Any additional options ordered should be checked as well.):
• Manipulator
• DX200
• Programming pendant
• Manipulator cables between the DX200 and the manipulator
• Accessories (Refer to Fig. 2-3(a) “MFL15D-875 Thick Washer
(delivered with the manipulator) and Cap Mounting Positions” and
Fig. 2-3(b) “MFL15D-1600 Thick Washer (delivered with the
manipulator) and Cap Mounting Positions”)
• Confirm that the manipulator and the DX200 have the same order
number. Special care must be taken when more than one
manipulator is to be installed.
If the numbers do not match, manipulators may not perform as
expected and cause injury or damage.
Accessories Quantity
Hexagon socket head cap screw M16
with anti-corrosive treatment (length: 50 mm)
4
Spring washer M16 with anti-corrosive treatment 4
Flat washer M16 (thickness: 5 mm, nickel-plated) 4
Cap CP-30-BC-12 9
Grease zerk PT1/8 6
To Next Page
Loading...
