2-6
168542-1CD
168542-1CD
MLX200 Software and
Operations
2 System Configuration
2.1 MLX200 Control Module
Table 2-1: MLX200 Control Module LED Indicators
LED Color State Meaning
Power
Button
None Off Power not connected to MLX200 Control
Module
Red Solid Power connected, but MLX200 Control
Module is turned off.
Blue Solid Power connected MLX200 Control Module
running.
PWR None Off Power not connected to MLX200 Control
Module
Green Solid Power connected and MLX200 Control
Module running
HDD Orange Blinking Indicates Hard Disk activity
Ethernet 1
(EtherCAT)
Green Off Link Inactive
Solid Link Active
Orange Off Link Inactive
Blinking Link Active and data being transmitted.
Ethernet 2
(Ethernet/IP)
(TCP/IP)
Green Off Link Inactive
Solid Link Active
Orange Off Link Inactive
Blinking Link Active and data being transmitted.
The Ethernet LEDs will show “Link Inactive” if the device
they are connected to is not powered on.
To Next Page
Loading...
