9 Maintenance and Inspection
9.2 Notes on Maintenance Procedures
9-7
157569-1CD
HW0485652
MPL100
The numbers in the above table correspond to the numbers in Table 9-1
"Inspection Items"
9.2 Notes on Maintenance Procedures
9.2.1 Battery Pack Replacement
The battery packs are installed in the position shown in F
ig. 9-2(a) “Battery
Location (Back View) (YR-MPL0100-A00)”, Fig. 9-2(b) “Battery Location
(Back View) (YR-MPL0100-A04)” and Fig. 9-2(c) “Battery Location (Top
View)”. If the battery alarm occurs in the DX100, replace the battery in
accordance with the following procedure:
Fig. 9-2(a): Battery Location (Back View) (YR-MPL0100-A00)
Fig. 9-2(b): Battery Location (Back View) (YR-MPL0100-A04)
Table 9-2: Inspection Parts and Grease Used
No. Grease Used Inspected Parts
13, 14, 15 Molywhite RE No.00 Speed reducers for S-, L-, U-
and T-axes
9, 16 Alvania EP Grease 2 L-axis balancer, bearings
Plate
Connector base
Base
Plate mounting screw M4
A
A
Plate
Connector base
Base
Plate mounting screw M4
To Next Page
Loading...
