YASKAWA MOTOMAN-MPL80 II - Using a Forklift; Shipping Bolts and Brackets

2 Transport
2.2 Shipping Bolts and Brackets
2-3
170904-1CD
HW1482870
MPL80 II
2.1.2 Using a Forklift
When using a forklift, the manipulator should be fixed on a pallet with bolts
as shown in Fig. 2-2 “Using a Forklift”. Insert claws under the pallet and lift
it. The pallet must be strong enough to support the manipulator. Transport
the manipulator slowly with due caution in order to avoid overturning or
slippage.
Fig. 2-2: Using a Forklift
2.2 Shipping Bolts and Brackets
The manipulator is provided with shipping bolts and a shipping brackets.
(See Fig. 2-1 “Transporting Position”.)
• The shipping bolts and bracket are painted yellow.
Delivered with the manipulator
Shipping bracket
Forklift claw entry
Pallet
Bolt M20 (8 bolts)
NOTE
Before turning ON the power, make sure that the shipping
bolts and brackets are removed. The shipping bolts and
brackets then must be stored for future use, in the event
that the manipulator must be moved again.
20 of 81