8 Electrical Equipment Specification
8.1 Position of Limit Switch
8-3
170904-1CD
HW1482870
MPL80 II
8.1.3.3 Setting Range of LU-Axes Interference Angle
L- and U-axes interference limit switches are designed to check the
interference angle of L- and U-axes.
As shown in Fig. 8-3 “LU-Axes Interference Angle”, the operation range of
U-axis can be set to any angles within +9° to +276° as the interference
angle with L-axis.
Fig. 8-3: LU-Axes Interference Angle
U-axis center of rotation
To Next Page
Loading...
