YASKAWA MOTOMAN-MPX2600 - Explosion-Proof Structure; Explosion-Proof Standard Notations

Explosion-Proof Structure
xii
180788-1CD
HW1484370
MPX2600
Explosion-Proof Structure
The explosion-proof structure of the MOTOMAN-MPX2600 consists of
intrinsic safety and inner pressure explosion preventing system.
Following notations show the explosion-proof structure for each country’s
explosion-proof standard.
Power ON Power OFF
Explosion-proof
structure
TIIS Exibpx
IIBT4Gb ExibIIBT4Gb
ATEX/
CAT.2
II2G ExibpxbIIBT4Gb II2G ExibIIBT4Gb
DANGER
In case installing the MOTOMAN-MPX2600 in the hazardous area,
classify the manipulator environment by following the local explosion-
proof standard and then, on the basis of the explosion-proof structure
notation on the MOTOMAN-MPX2600, confirm that the manipulator is
possible to install in that area.
PROHIBITED
• Any modification of the MOTOMAN-MPX2600, and the following is
strictly prohibited:
1. Explosion-proof devices and system installation
2. Safeguarding and the safety devices mounted on these safeguards
3. Emergency stop button, and other safety devices
4. Robot control system such as the DX200 robot controller, the
manipulator drive section and the power transmission section
12 of 116