3-6
180788-1CD
HW1484370
3 Installation
3.3 Mounting methods
MPX2600
3.3.3 Measures to Prevent the Manipulator from Falling
For the wall- or ceiling-mounted ways, take appropriate measures to
avoid the falling of the manipulator in case of emergency.
Refer to Fig. 3-5 “Precaution Against Falling” for details.
Fig. 3-5: Precaution Against Falling
In case of using the wall/ceiling-mounted way, inform
YASKAWA of the matter when placing an order. Be sure to
contact your YASKAWA representative (listed on the
backcover of this instruction manual) to perform a
wall/ceiling installation on site.
Manipulator base
Hexagon socket head cap
screw M20 (4 screws)
(Tightening strength:
1200 N/mm or more)
Support for fall prevention
To Next Page
Loading...
