YASKAWA MOTOMAN-MS165 - Grease Replenishment for Gas Balancer Link Part

9 Maintenance and Inspection
9.3 Grease Exchange
9-14
167109-1CD
HW1482308
MS165
9.3.4 Grease Replenishment for Gas Balancer Link Part
Fig. 9-9: Gas Balancer Link Part
1. Remove the plugs from the grease inlets and from the grease exhaust
ports of the link and .
2. Inject grease through the grease inlets of the link and using a
grease gun.
– Grease type: Alvania EP Grease 2
– Amount of grease: to the link : 8 cc
(30 cc for 1st supply)
to the link : 8 cc
(16 cc for 1st supply)
3. Wipe the discharged grease with a cloth at the grease exhaust ports
and reinstall the plugs to the exhaust ports of the link and . Apply
ThreeBond 1206C to the thread part of the plugs, and tighten the plugs
with a tightening torque of 4.9 N•m (0.5 kgf•m).
4. Reinstall the plugs to the grease inlets of the link and . Apply
ThreeBond 1206C to the thread part of the plugs, and tighten the plugs
with a tightening torque of 4.9 N•m (0.5 kgf•m.)
Link 2 Bearing
Link 1 Grease exhaust port
(Hexagon socket head plug PT1/8)
Link 1 Bearing
Link 1 Grease inlet
(Hexagon socket head plug PT1/8)
Link 2 Grease exhaust port
(Hexagon socket head plug PT1/8)
Link 2 Grease inlet
(Hexagon socket head plug PT1/8)
75 of 100