YASKAWA MOTOMAN-MS165 - Explanation of Warning Labels; WARNING Label A: Moving parts may cause injury

viii
167109-1CD
HW1482308
MS165
Explanation of Warning Labels
The following warning labels are attached to the manipulator.
Always follow the warnings on the labels.
Also, an identification label with important information is placed on the
body of the manipulator. Prior to operating the manipulator, confirm the
contents.
Note: Taking the maintenance-relevant trainings offered by YASKAWA is
indispensable for replacing the L-axis of the balancer-equipped
manipulator.
Fig. : Warning Label Locations
WARNING Label B
WARNING Label A
WARNING Label B
WARNING Label C
Nameplate
(On the manipulator
manufactured by May 2014)
Nameplate
(On the manipulator manufactured after June 2014)
WARNING Label C
WARNING
Do not enter
robot
work area.
WARNING
Moving parts
may cause
injury
Nameplate:
WARNING Label B:
WARNING Label A:
release the brake. Failure to observe
Do not remove the motor,and do not
this caution may result in injury from
unexpected turning of the manipulator arm.
Please contact your Yaskawa representive.
DANGER
WARNING Label C:
MADEINJAPAN
YASKAWAELECTRICCORPORATION
Kitakyushu806-0004Japan
2-1Kurosakishiroishi,Yahatanishi-ku,
SERIALNO.
PAYLOAD
kg
TYPE
MASS
DATE
ORDERNO.
kg
MOTOMAN-
MODEL
NJ3878
8 of 100