YASKAWA MOTOMAN MYS450L - Using a Crane

MYS450L
E1101000117GB01 11
2.1.1 Using a Crane
As a rule, the robot should be lifted by a crane with two wire ropes when removing it from the
package and moving it. Be sure that the Robot is fixed with the shipping bolts and brackets
before transport, and lift it in the posture as shown in "Figure 2: Transporting Position".
Figure 2: Transporting Position
1
Bolt M4 x 15, Washer M6
2
Cable tie
3
Mounting screws arm, M12 x 20
4
2 eyebolts M12, delivered with the robot
1
2
3
4