MYS450L
E1101000117GB01 23
U allowable moment of
inertia
rated
0.01 kgm
2
max
0.12 kgm
2
Wirst Shaft diameter ø20 (h7) mm
Through hole ø14 mm
Z down force 150 Nm
Installed wire for customer use 24 wires (15-pin + 9+pin: D-sub connector)
Installed pneumatic tube for customer us 2 pneumatic tubes (ø6 mm): 0.59 Mpa
1 pneumatic tube (ø4 mm): 0.59 Mpa
Ambient conditions Ambient temperature 5 to 40° C
Relative humidity 10 to 80% (non condensation)
Equivalent continuous A-weighted sound pressure level L
Aeq
= 70 dB (A)
Table 2: Technical data
Position MYS450L
To Next Page
Loading...
