4.1 Replacing XRC Parts
4-6
Fuse Locations in Power Supply Unit XPU09 (for SV3X, UP6 and SK16X)
If a fuse appears to be blown, remove each fuse shown above and check the continuity with
an electric tester.
If the fuse is blown, replace it with the same type of fuse (supplied).
Determine and correct the cause of the blown fuse. If the problem is uncorrected, the fuse
may blow again.
NJ2096-1
DATE
RY8200-9021
JZRCR-XPU03
JAPAN
TYPE
SER NO.
YASKAWA ELECTRIC CORPORATION
1-1999
5X 4X
10A 250V
2F1F
10A 250V
3X
1KM
2X
1X
(1F, 2F)
Fuse
250V 10A
326010(LITTEL)
NOTE
To Next Page
Loading...
