YASKAWA Motoman UP6 - Job Call Allocation

3.14 Number Key Customize Function
3-81
When the instruction list dialog box is displayed, select the instruction to be changed.
"
Job Call Allocation
Use this function in the key allocation (EACH) display.
*1
The selection dialog box is displayed.
*2
The reserved job registration No. is displayed in the “ALLOCATION CONTENT”
(reserved job registration No.: 1 to 10).
To change the reserved job registration No., move the cursor to the No. and press
[SELECT]. Numeric values can now be entered. Input the number to be changed, and
press [ENTER].
Move the cursor to the “FUNCTION” of the key to be allocated Press [SELECT]
*1
Select “JOB CALL”
*2
KEY ALLOCATION(EACH)
APPLI.NO.:1
KEY FUNCTION ALLOCATION CONTENT
- INSTRUCTION WAIT
. MAKER
0 MAKER
1 MAKER
2 MAKER
3 MAKER
4 MAKER
!
DATA
EDIT DISPLAY UTILITY
R1
S
C
L
Operation
Explanation
KEY ALLOCATION(EACH)
APPLI.NO.:1
KEY FUNCTION ALLOCATION CONTENT
- INSTRUCTION DOUT
. JOB CALL 1
0 MAKER
1 MAKER
2 MAKER
3 MAKER
4 MAKER
!
DATA
EDIT DISPLAY UTILITY
R1
S
C
L