YASKAWA Motoman UP6 - Alternate Output Allocation; Momentary Output Allocation

3.14 Number Key Customize Function
3-83
"
Alternate Output Allocation
Use this function is used in the key allocation (SIM) display.
*1
The selection dialog box is displayed.
*2
The output No. is displayed in the “ALLOCATION CONTENT”.
To change the output No., move the cursor to the No. and press [SELECT]. Numeric
values can now be entered. Input the number to be changed, and press [ENTER].
"
Momentary Output Allocation
Use this function in the key allocation (SIM) display.
*1
The selection dialog box is displayed.
Move the cursor to the “FUNCTION” of the key to be allocated Press [SELECT]
*1
Select “ALTERNATE OUTPUT”
*2
Move the cursor to the “FUNCTION” of the key to be allocated Press [SELECT]
*1
Select “MOMENTARY OUTPUT”
*2
Operation
Explanation
KEY ALLOCATION(SIM)
APPLI.NO.:1
KEY FUNCTION ALLOCATION CONTENT
- MAKER
. MAKER
0 MAKER
1 MAKER
2 MAKER
3 MAKER
4 MAKER
!
DATA
EDIT DISPLAY UTILITY
R1
S
C
L
MAKER
ALTERNATE OUTPUT
MOMENTARY OUTPUT
PULSE OUTPUT
4 BIT OUTPUT
8 BIT OUTPUT
MAKER
KEY ALLOCATION(SIM)
APPLI.NO.:1
KEY FUNCTION ALLOCATION CONTENT
- ALTERNATE NO. : 1
. MAKER
0 MAKER
1 MAKER
2 MAKER
3 MAKER
4 MAKER
!
DATA
EDIT DISPLAY UTILITY
R1
S
C
L
Operation
Explanation