3.14 Number Key Customize Function
3-87
*1
The selection dialog box is displayed.
*2
The instruction corresponding to the I/O control allocated by key allocation (SIM) is dis-
played in the “ALLOCATION CONTENT”.
The allocated instruction changes automatically when “ALLOCATION CONTENT” is
changed by key allocation (SIM).
Even if the I/O control allocation is changed to the default setting allocated by the man-
ufacturer, the settings for key allocation (EACH) remain the same.
Move the cursor to the “FUNCTION” of the key that has been allocated with I/O control with
key allocation (SIM) Press [SELECT]
*1
Select “OUTPUT CONTROL INST”
*2
Operation
Explanation
KEY ALLOCATION(EACH)
APPLI.NO.:1
KEY FUNCTION ALLOCATION CONTENT
- INSTRUCTION DOUT
. JOB CALL 1
0 DISPLAY WORK POSITION DISP
1 MAKER
2 MAKER
3 MAKER
4 MAKER
!
DATA
EDIT DISPLAY UTILITY
R1
S
C
L
MAKER
INSTRUCTION
JOB CALL
OUTPUT CONTROL INST
DISPLAY
MAKER
KEY ALLOCATION(EACH)
APPLI.NO.:1
KEY FUNCTION ALLOCATION CONTENT
- INSTRUCTION DOUT
. JOB CALL 1
0 DISPLAY WORK POSITION DISP
1 INSTRUCTION DOUT OGH#(1) 0
2 MAKER
3 MAKER
4 MAKER
!
DATA
EDIT DISPLAY UTILITY
R1
S
C
L
To Next Page
Loading...
