YASKAWA Motoman UP6 - Page 282

5.2 Input/Output Status
5-4
"
Modify the Signal Name
The name of the universal input or output signal can be modified.
The name can be modified in two ways.
Direct Modify on the Detailed Display
*1
Character input line is displayed.
*2
If the signal name has already been registered, the current name is displayed on the
input line.
If you wish to change the name, delete the characters on the input line by pressing
[CANCEL], and then input a new name.
Select the desired output signal number in the detailed display.
*1
Input the signal
name
*2
Press [ENTER]
*3
UNIVERSAL OUTPUT
GROUP OG#01 122:DEC. 7a:HEX.
OUT#001 #1010 [ ]
OUT#002 #1011 [ ]
OUT#003 #1012 [ ]
OUT#004 #1013 [ ]
OUT#005 #1014 [ ]
OUT#006 #1015 [ ]
OUT#007 #1016 [ ]
OUT#008 #1017 [ ]
!
DATA
EDIT DISPLAY UTILITY
R1
S
C
L
Operation
Explanation
DATA
EDIT DISPLAY UTILITY
UNIVERSAL INPUT
GROUP IG#01 123:DEC. 7b:HEX.
IN#001 #0010 [
]
IN#002 #0011 [ ]
IN#003 #0012 [ ]
IN#004 #0013 [ ]
IN#005 #0014 [ ]
IN#006 #0015 [ ]
IN#007 #0016 [ ]
>
!
R1
SC
L
IN#007 #0016 [ ]
>TEST SIGNAL
!