System Setup
9 - 141
9.6.4 Deleting interference area data
1. Select {ROBOT} from the main menu.
2. Select {INTERFERENCE}.
– The "INTERFERENCE AREA" window appears.
3. Select the interference signal to be deleted.
– Select the interference signal number to be deleted with [GO BACK PAGE], or enter the
number directly.
– Select {PAGE} when entering the interference signal number using the numeric keys to
enter the signal number.
4. Select {DATA} from the menu.
– The pull-down menu appears.
5. Select {CLEAR DATA}.
– The confirmation dialog box appears.
To Next Page
Loading...
