YASKAWA MOTOMAN YRC1000 - 9.13 Setting the controller clock

System Setup
9 - 172
9.13 Setting the controller clock
The clock inside the robot controller can be set as follows.
1. Select {SETUP} under main menu.
2. Select {DATE/TIME}.
– The DATE/TIME SET window appears.
3. Select “DATE” or “TIME”.
– ”The input buffer line appears.
4. Input the new date/time.
– For instance, to set the date to August 1, 2008, input "2008.8.1". To set the time at
twelve o’clock, enter “12.00”.
5. Press [ENTER].
– The date/time is changed.