System Setup
9 - 199
NOTICE
Do not turn OFF the YRC1000 power supply when the font size is being changed (when the
font size setting dialog box is on the screen).
9.19.2 Setting the button size
Robot controller enables changing the size of operation buttons.
The button size in the main menu area, menu area, and instruction list can be respectively
selected from three sizes.
9.19.2.1 Applicable range for button size change
Changing the button size is allowed in the main menu, menu (pull-down menu), and
instruction list indicated in the following figure:
Menu area (pull down menu)
Main menu
Instruction list
1
1
2
3
2
3
To Next Page
Loading...
