System Setup
9 - 211
• Graph Display
The lifetime calculation can be checked in the graph. The shift of lifetime calculation is
shown on the programming pendant, so that it is possible to check visually how the lifetime
decreases. Use this function as a method to judge the lifetime of the speed reducer. The
graph is shown by the following procedures.
1. Select {PM} of main menu.
2. Select {PM(REDUCER)}.
3. Select {DISPLAY}.
The pull down menu is shown.
4. Select {GRAPH}.
The graph is shown.
5. Select {GRAPH}.
The pull down menu is shown.
To Next Page
Loading...
