System Setup
9 - 221
= Group
Select {=Group}, and the pull down menu appears. Select the group to display.
= Name
The names set in the each setting window are displayed.
= Renew.
Pressing the “=Renew” button updates the latest data.
= Days.
Set the number of the days between 5 and 150 days to be displayed. The latest data
is displayed on the right side of the graph, and the old data set by “=Days” is displayed
on the left side of the graph.
= Torque
The minimum value and the maximum value of the vertical axis can be set. “MIN” is
the minimum value, and “MAX” is the maximum value.
= Axis
Removing the tick in the box hides the axis on the screen.
= Save CSV
Pressing the “CSV” button saves the variation and measured value into the external
memory device as CSV format. As for the external device, it can be saved into both
CF card and USB, but the data is priory save into the CF card. The followings are the
name for a file and a folder to be saved.
File name: “the name which is set in the each setting window” + “year/month/day” +
”hour/minute/second”. CSV
Folder name: “SR LIFE DIAGNOSIS”
= Hard COPY
Pressing the “=Hard COPY” button saves the hard copy of the screen as JPG format
into the CF card.
The following is a name for the file.
File name: “year/month/day” + “hour/minute/second”. JPG
= Close
Pressing “=CLOSE” button closes the graph window.
2
3
4
5
6
7
8
9
10
To Next Page
Loading...
