System Setup
9 - 321
9.29.3 Setting axes detachment function
Operator can set or modify the setting items for axes detachment function in detail setting
screen.
The specified parameters are to be set automatically according to the setting contents in
detail setting screen.
1. Select {SYSTEM} under the main menu.
Sub menu is shown.
2. Select {SETUP}.
Setting selection screen is shown.
3. Move the cursor to {OPTION FUNCTION} and select.
“OPTION FUNCTION” screen is shown.
4. Move the cursor to {AXES DETACHMENT} and select.
Detail setting screen for axes detachment function is shown.
To Next Page
Loading...
